- Product guides / Get started
- ORP/pH Meter
-
Ask Bluebot
-
Bluelab Growbook
-
Product guides / Get started
- OnePen
- pH Pen
- Soil pH Pen
- Conductivity Pen
- Growers Toolbox
- Truncheon Nutrient Meter
- Combo Meter
- Combo Meter Plus
- Multimedia pH Meter
- ORP/pH Meter
- Pulse Meter and App
- Guardian
- Pro Controller
- PeriPod
- Sample Tube and Fitting
- pH Controller
- Connect Stick 2
- pH Probe
- Leap pH Probe
- Replacement probes
- Care kit
-
Reference articles
-
Software guides
-
Care, cleaning and maintenance
-
Returns and RMAs
-
How-To Guides
-
IntelliGrow
-
IntelliClimate
-
IntelliDose
-
IntelliLink
-
Downloads
Getting Started Guide - Bluelab ORP Meter
Whether setting up your new Bluelab ORP Meter or troubleshooting, this guide has what you need to get started. From step-by-step instructions to FAQs and tips, we’ve designed this resource to help you get the most out of your Bluelab device.
Attach the supplied Bluelab ORP Probe to the meter via the BNC connection.
To operate
- Remove the storage cap and place the probe tip in the solution.
- Press the power button to turn on.
- Stir the probe gently and wait for the reading to stabilise.
- Rinse the probe tip in fresh tap water after each use.
The Bluelab ORP Meter doubles as a pH Meter when fitted with the Bluelab pH Probe (sold separately).
To switch between mV (ORP) and pH modes, press the CAL button and follow the Getting Started Guide for the pH Probe.