Getting started with IntelliDose

Once you've Installed your IntelliDose, test to make sure that it is active.

Switch on the power and check that the power light on the front panel is on and that the LCD display has some information on it. 

Next you need to create an Edenic account and setup up your Bluelab IntelliLink

OR

create your IntelliGrow account and either setup your AutoGrow IntelliLink or download the IntelliGrow installer.

If using the IntelliGrow Installer you'll need to select either Windows or Mac setup, depending on what computer/operating system you are using:

Connecting to IntelliGrow with Windows

If you have more than one new controller, connect their USB cables one-at-a-time and when the software asks, provide the requested information. For new or replacement controllers, you'll be asked which grow room it's located in and then to give the controller a name. Use a short meaningful name like Doser1, Climate2 etc so that understanding which device is located in which area is simple to understand as you add more devices.

IntelliGrow will automatically detect any connected controllers and should communicate immediately. You will also see information from the controller(s) on your computer screen. 

IntelliDose Manual