Back to home

Product guides / How-to articles

Product guides / How-to articles

Pulse Meter and App

Is the Pulse Meter water resistant or waterproof?

Bluelab Pulse Meter - How to Calibrate

What if I can't see my Pulse on the "Select Device" list?

How can I change the Pulse app notification sounds and vibrations?

Every time I connect to my Pulse the app says Synchronising. What is it synchronising?

What is the Pulse meter's lifespan?

Pulse Measurement Screen “Not Configured” - Explanation

Understanding Nutrient Measurements with the Pulse Meter

How do I change the settings on the Pulse meter?

How do I check what settings are on the Pulse device?

How do I give feedback on the Pulse app or request new features?

Where is the Pulse measurement being taken from?

Why are the conductivity measurements from my Pulse Meter different from my normal extraction tests?

How do I know when my Pulse Meter battery is running low?

How do I unpair my Pulse app from a Pulse device?

Does the Bluelab Pulse Meter lose its measurements when the battery runs out?

Is the Pulse Meter waterproof?

How long does the Pulse meter battery last?

Does the Custom Media function of the Bluelab Pulse only calibrate the moisture content?

How do I delete multiple measures at once from the Pulse app?

What is the black line on the Pulse probe?

How do I delete all measurements from the Pulse app?

Why can't I set my Pulse conductivity units to ppm?

Does the Bluelab Pulse Meter or Pulse App require an internet connection?

Why do the Lights on the Pulse flash a few times before going solid?

What maintenance is required for the Bluelab Pulse Meter?

How do you turn the Pulse Meter on/off?

Does the Bluelab Pulse Meter always measure all three readings; moisture, conductivity and temperature?

I have just replaced my Pulse Meter battery but it keeps on restarting. How do I get it to run?

Can I add to a calibration after it is saved?

Why does the Pulse app show “Stabilising” whenever a measurement is taken?

Which base medium do I use on my Pulse app?

How much battery life is expected with the Bluelab Pulse Meter?

With the Pulse Meter and app, how long will it take to create a custom calibrated medium?

How much battery does my Pulse meter have left?

Is all my Pulse device data backed up?

Pulse Configure Screen “Not Configured” - Explanation

Why does the status bar on the measurement screen of my Pulse app say “Not Connected”?

How do I delete a measurement from the Pulse app history?

How can I move a note in the Pulse app?

How do I change my temperature units?

How do I know when the Bluelab Pulse Meter has taken a measurement?

How do I know when my Pulse battery is running out?

How accurate is the Bluelab Pulse Meter?

How do I export my Pulse app data?

Why can’t the Pulse app see my Pulse meter after pairing with it through Android?

What kind of battery does the Pulse Meter run on?

What is the red line around the Pulse Meter battery door screws?

Why does the Pulse app need location access?

Why is my file exported from the Pulse app empty?

Do I need to calibrate the Bluelab Pulse Meter?

How do I see what the settings were when a Pulse measurement was taken?

Bluelab Pulse Meter - How to Measure

Is there a Bluelab Pulse Meter carry case?

How many measurements can the Pulse Meter store?

See more

Leap pH Probe

FAQ's for the Leap pH Probe

Connect Stick 2

Bluelab Connect Stick 2 & Range Extender 2 - Setup

Connect Stick can't be detected - "Detecting Connect stick..." message resolved

Combo Meter

Combo Meter and pH Probe Cleaning and Calibration - video

pH Pen

How to disinfect Bluelab products during COVID-19

My pH Pen will not calibrate!

Bluelab pH Pen - Cleaning and Calibration Video

Soil pH Pen

My Soil pH Pen will not calibrate!

Truncheon Nutrient Meter

The Truncheon Meter - information

PeriPod

Bluelab PeriPod Dosing Pump Size Selection Guide

pH Controller

pH Controller Acid/Alkaline Strength Recommendations